Latest IEC International Electrotechnical Commission Downloads

IEC 61821:2011-Electrical installations for lighting and beaconing of aerodromes-Maintenance of aeronautical ground lighting constant current series circuits, IEC 60051-9:2019-Direct acting indicating analogue electrical measuring instruments and their accessories-Part 9: Recommended test methods, IEC 60601-2-29:2008-Medical electrical equipment-Part 2-29: Particular requirements for the basic safety and essential performance of radiotherapy simulators, IEC 60034-4-1:2018-Rotating electrical machines-Part 4-1: Methods for determining electrically excited synchronous machine quantities from tests, IEC TS 60216-7-1:2015-Electrical insulation materials-Thermal endurance properties-Part 7-1: Accelerated determination of relative thermal endurance using analytical test methods (RTEA)-Instructions for calculations based on activation energy, IEC 60704-2-8:2020-Household and similar electrical appliances-Test code for the determination of airborne acoustical noise-Part 2-8: Particular requirements for electric shavers, IEC 60364-7-711:2018-Low-voltage electrical installations-Part 7-711: Requirements for special installations or locations-Exhibitions, IEC TR 61200-52:2013-Electrical installation guide-Part 52: Selection and erection of electrical equipment-Wiring systems, IEC 61084-2-1:2017-Cable trunking systems and cable ducting systems for electrical installations-Part 2-1: Particular requirements-Cable trunking systems and cable ducting systems intended for mounting on walls and ceilings, IEC TS 60034-24:2009-Rotating electrical machines-Part 24: Online detection and diagnosis of potential failures at the active parts of rotating electrical machines and of bearing currents-Application guide. Peruse this IEC 61326-2-6:2012-Electrical equipment for measurement, control and laboratory use-EMC requirements-Part 2-6: Particular requirements-In vitro diagnostic (IVD) medical equipment for all the PDFs.



IEC 60730-2-11:2019-Automatic electrical controls-Part 2-11: Particular requirements for energy regulators, ISO 80601-2-79:2018-Medical electrical equipment-Part 2-79: Particular requirements for basic safety and essential performance of ventilatory support equipment for ventilatory impairment, IEC 60335-2-44:2002/AMD1:2008-Amendment 1-Household and similar electrical appliances-Safety-Part 2-44: Particular requirements for ironers, IEC 60641-3-2:2007-Pressboard and presspaper for electrical purposes-Part 3: Specifications for individual materials-Sheet 2: Requirements for presspaper, IEC 61089:1991/AMD1:1997-Amendment 1-Round wire concentric lay overhead electrical stranded conductors, IEC 62011-2:2004-Insulating materials-Industrial, IEC PAS 60512-27-200:2018-Connecteurs for electrical and electronic equipment-Tests and measurements-Part 27-200: Additional specifications for signal integrity tests up to 2 000 MHz on IEC 60603-7 series connectors-Tests 27a to 27g, IEC 60349-1:2010-Electric traction-Rotating electrical machines for rail and road vehicles-Part 1: Machines other than electronic converter-fed alternating current motors, IEC 61800-1:1997-Adjustable speed electrical power drive systems-Part 1: General requirments-Rating specifications for low voltage adjustables speed d.c. power drive systems, IEC 61242:1995/AMD2:2015-Amendment 2-Electrical accessories-Cable reels for household and similar purposes. Have a look at this IEC 62870:2015-Electrical installations for lighting and beaconing of aerodromes-Safety secondary circuits in series circuits-General safety requirements for official info.



IEC TS 61934:2011-Electrical insulating materials and systems-Electrical measurement of partial discharges (PD) under short rise time and repetitive voltage impulses, IEC 60085:2007-Electrical insulation-Thermal evaluation and designation, IEC 61988-3-2:2009-Plasma display panels-Part 3-2: Interface-Electrical interface, IEC TR 62354:2014-General testing procedures for medical electrical equipment, IEC 60851-5:2008+AMD1:2011 CSV-Winding wires-Test methods-Part 5: Electrical properties, IEC 61557-15:2014-Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c.-Equipment for testing, IEC 60034-3:2007-Rotating electrical machines-Part 3: Specific requirements for synchronous generators driven by steam turbines or combustion gas turbines, IEC 60335-2-8:2012/AMD1:2015-Amendment 1-Household and similar electrical appliances-Safety-Part 2-8: Particular requirements for shavers, IEC 60335-2-90:2015/AMD1:2019-Amendment 1-Household and similar electrical appliances-Safety-Part 2-90: Particular requirements for commercial microwave ovens, IEC 61196-1-122:2006-Coaxial communication cables-Part 1-122: Electrical test methods-Test for cross-talk between coaxial cables. Go to this IEC 61628-2:1998-Corrugated pressboard and presspaper for electrical purposes-Part 2: Methods of test for more articles.



IEC 60512-2-5:2003-Connectors for electronic equipment-Tests and measurements-Part 2-5: Electrical continuity and contact resistance tests-Test 2e: Contact disturbance, IEC 61010-2-040:2015-Safety requirements for electrical equipment for measurement, IEC 60092-202:2016-Electrical installations in ships-Part 202: System design-Protection, IEC 60255-15 Ed. 1.0-Electrical relays. Part 15: Endurance tests for electrical relay contacts-Specification for the characteristics of test equipment, IEC 60601-1-11:2015-Medical electrical equipment-Part 1-11: General requirements for basic safety and essential performance-Collateral Standard: Requirements for medical electrical equipment and medical electrical systems used in the home healthcare environment, IEC 60773:2021-Rotating electrical machines-Test methods and apparatus for the measurement of the operational characteristics of brushes, IEC 62645:2019-Nuclear power plants-Instrumentation, IEC 60335-2-65:2002/AMD1:2008-Amendment 1-Household and similar electrical appliances-Safety-Part 2-65: Particular requirements for air-cleaning appliances, IEC 60601-2-23:2011-Medical electrical equipment-Part 2-23: Particular requirements for the basic safety and essential performance of transcutaneous partial pressure monitoring equipment, IEC 60704-2-9:2003-Household and similar electrical appliances-Test code for the determination of airborne acoustical noise-Part 2-9: Particular requirements for electric hair care appliances.